EN

5L organic solvent circulation spray dryer

5L organic solvent circulation spray dryer

5L organic solvent circulation spray dryer

  • Description

1、 Product Introduction:

FY-DGZJ5Y organic solvent spray dryer is a spray dryer for organic solvents, toxic or harmful materials. When the organic solvent concentration in the materials is too high, flammable and explosive, or the materials are suitable for oxidation, the machine uses nitrogen to replace the air in the drying and atomizing system. Nitrogen is used circularly and hermetically after passing through the filtering device and multistage condensing device, so as to achieve safety in the experiment process, and also to prevent samples from being oxidized, so as to complete the drying and collection process.

2、 Product features:

1. Nitrogen sealed circulation greatly saves gas usage, achieves experimental safety, and prevents sample oxidation

2. A high-precision oxygen measurement system that automatically controls the start and stop of the feed based on the concentration of oxygen, ensuring the safety of the experiment

3. Sensitivity based pressure measurement system and automatic pressure relief to ensure the safety of spatial pressure

4. Efficient filtration system greatly reduces material loss after drying

5. Multi stage pinhole solvent condensation system greatly improves the recovery rate of solvents

6. Multiple temperature detection systems to achieve the drying effect of some thermosensitive materials

7. Variable frequency fan allows for arbitrary control of the inlet and outlet air volume, greatly reducing the loss of small materials

8. The jacket type heating system reduces heat loss in the pipeline, has high temperature control accuracy, and also achieves high temperature safety of the machine

9. The vortex separators in the drying tower are detachable for cleaning, solving the problem of difficult temperature cleaning

10. 7-inch large LCD touch screen, temperature curve memory function, real-time monitoring, the whole machine is made of stainless steel material

11. Optional self-produced nitrogen generator to reduce the frequency of nitrogen cylinder usage

3、 Product parameters:

Inlet air temperature: room temperature -300 ℃ (accuracy ± 0.5 ℃ with curve memory function)

Export temperature: Room temperature -200 ℃ (accuracy ± 0.5 ℃)

Primary condensation temperature: -20 to 30 ℃ (accuracy ± 0.5 ℃)

Secondary condensation temperature: -10 to 30 ℃ (accuracy ± 0.5 ℃)

Pipeline temperature detection: room temperature -100 ℃ (accuracy ± 0.5 ℃)

Heating system: dual stage

Feed rate: 50-5000ml/H

Atomization method: centrifugal (preferred)

Oxygen measurement system detection range: 0-100% (accuracy 0.1)

Oxygen detection module: Ensure that the oxygen concentration is below 3% before starting feeding (the value can be set arbitrarily)

Pressure measurement system range: (0-100) Kpa

Explosion proof module: Automatic pressure relief above 0.02MPA (value can be set arbitrarily)

Explosion proof film: automatic type

Wind volume adjustment: 0-300m ³/h can be adjusted freely (variable frequency fan)

Nitrogen supply: 100L/min (purity 99.9%) requires CE EU certification

Vibration system: dual level vibration

Drying tower size: φ 800 * H1500mm

Cleaning window: 340 * 340mm

Filter recycling size: φ 260 * H1300mm (1um particles can be filtered)

Condensation device size: φ 320 * H1100mm * 2

Collection tank: φ 550 * H1560mm * 2

Overall dimensions: 2000 * 1500 * 2500mm (length, width, height)

Overall power: 26KW

Voltage: 380V

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.