EN

Small spray dryer

 Small spray dryer 

  • Description

The small spray dryer is mainly suitable for universities, research institutes and laboratories of food, medicine and chemical enterprises to produce micro particle powders. It has broad spectrum applicability to all solutions such as emulsion and suspension, and is suitable for drying heat sensitive substances such as biological products, biological pesticides, enzyme preparations, etc. Because the sprayed materials are subject to high temperature only when they are sprayed into aerosol particles, they are only heated instantaneously, which can keep the active ingredients of these active materials intact after drying.

Main Features

Adopting stainless steel nozzle, high efficiency and good atomization effect

The whole machine is made of SUS304 stainless steel material, which has strong corrosion resistance

Color LCD touch screen parameter display: inlet temperature/outlet temperature/peristaltic pump speed/air volume/needle frequency

Equipped with a nozzle cleaner (through needle), it will automatically clear when the nozzle is blocked, and the frequency of the through needle can be automatically adjusted

● Shutdown protection function: When shutting down, simply press the stop button, and the machine will immediately stop running except for the fan, ensuring that the equipment will not burn out the heating part due to misoperation (forcibly shutting down the fan)

● The spray, drying and collection system is made of transparent high-quality high borosilicate heat-resistant glass material, and the drying process is carried out in a pollution-free environment

● Two fluid spray atomization structure, the whole machine is made of high-quality stainless steel materials, compact design, and no auxiliary equipment is required

The design of drying temperature control adopts real-time PID constant temperature control technology, which enables accurate temperature control in the entire temperature range and heating temperature control accuracy of ± 1 ℃

The feeding amount can be adjusted by the feeding peristaltic pump, and the minimum sample volume can reach 30ml

The dried finished dry powder has a relatively uniform particle size, with over 95% of the dry powder within the same particle size range

For viscous materials, there is a nozzle cleaner (through needle) that automatically clears the nozzle when it is blocked, and the frequency of the through needle can be adjusted automatically.

Technical Parameters

The software operating system with genuine intellectual property rights (software copyright number: 2019SR1071014) has powerful functions and optional 485 communication

Air compressor: built-in, silent type

◆ Inlet air temperature control: 30 ℃~300 ℃

◆ Air outlet temperature control: 30 ℃~140 ℃

Evaporation water volume: 1500mL/H~2500ml/h

◆ Feed rate: 30-2500ml/h (adjustable)

◆ Feeding method: peristaltic pump adjustment

Temperature control accuracy: ± 1 ℃

Average drying time: 1.0-1.5s

Nozzle diameter: 0.5mm/0.7mm/0.75mm/1.0mm/1.5mm/2.0mm optional

Heating power: 3KW

◆ Overall power: 4.5KW/220V

◆ Dimensions: 1500mm (height) x 800mm (length) x 650mm (width)

◆ Optional:

(1) 485 communication function (2) bag dust removal device (3) dual stage collection system (4) nitrogen access system

upload/attachment/image/202611/17/17948714139971301fea9d22453fbdb7c728f4cdc6_local.png

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.