EN

5l low-temperature spray dryer

5l low-temperature spray dryer

  • Description

1、 Product Introduction:

Low temperature spray dryer is a model specially developed by our company for heat sensitive and heat resistant materials. This model uses the principle of air saturation humidity to test the drying and molding of liquid materials under normal pressure and low temperature environment (about 30-65 ° C), which ensures the original viability of materials, improves the drying and molding effect and collection rate of materials, and is widely used in biomedicine, food and beverage, plant extracts, chemical materials and other industries

 

2、 Product features:

1.7-inch large LCD touch screen control with RS232 communication port

2. The whole machine is made of 304 stainless steel material, with no welding spots or scars on the surface, corrosion-resistant, and easy to clean

3. It has a one click power on function and a shutdown reservation function, which saves time and effort, and is easy and convenient to operate

4. The feeding speed and atomization pressure can be adjusted digitally and recorded in real-time

5. The needle has the function of unclogging the nozzle, and the frequency and pressure can be adjusted

6. High and low temperature all-in-one machine, for materials, can achieve high temperature (above 100 ° C) drying, or can switch to low temperature (30-65 ° C) spray drying

7.304 stainless steel double-layer jacket heating system, uniform temperature control, energy-saving and energy-saving

8. Built in oil-free air compressor with low noise and long service life

9. Built in condensation system, automatically recovers moisture

10. Automatic humidity detection with built-in automatic dehumidification and drying function

11. The intake air volume can be adjusted arbitrarily, and the operation is simple and convenient

12.316 material two fluid atomizing nozzle (0.5/0.75/1.0/2.0mm optional), with uniform atomization effect and formed particles evenly distributed in a normal state

13. The entire equipment has multiple safety protection systems such as leakage, voltage regulation, and overheating, which automatically shut down in case of fault risks

14. Online temperature curve memory function, real-time recording of temperature fluctuations

15. Can synchronize mobile devices to directly operate the system without the need for manual supervision

16. The vortex separator of the drying tower is detachable for cleaning, solving the temperature problem of difficult cleaning

 

3、 Product parameters:

Model: FYPWG-5000D

Drying tower diameter: 800mm

Processing capacity: 0-5000ml

Low temperature mode: room temperature -80 ° C (accuracy ± 0.5 ° C with curve memory function)

High temperature mode: Room temperature -280 ° C (accuracy ± 0.5 ° C with curve memory function)

Export temperature: room temperature -100 ° C (accuracy ± 0.5 ° C)

Pressure regulation: 0-0.6MPa

Airflow: 0-420m ³/H

Heating power: 6000W

Automatic dehumidification power: 2000W * 2

Automatic energy-saving system: available

Atomization method: centrifugal atomization

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.