EN

Organic solvent spray dryer (all stainless steel)

Organic solvent spray dryer (all stainless steel)

Organic solvent spray dryer (all stainless steel) is a spray dryer for organic solvents, toxic or harmful materials. When the concentration of organic solvents in the materials is too high, flammable and explosive, or the materials are suitable for oxidation, the machine uses nitrogen instead of dry atomization system

  • Description

Product Introduction

FY-PWGZ6000 nitrogen closed cycle spray dryer is a spray dryer for organic solvents, toxic or harmful materials. When the concentration of organic solvents in the materials is too high, flammable and explosive, or the materials are suitable for oxidation, the machine uses nitrogen to replace the air in the dry atomization system. Nitrogen is used in a closed cycle after passing through the filtering device and multi-stage condensing device, so as to ensure the safety in the experiment process, and also ensure that the samples are not oxidized, and complete the drying and collection process.

 

Product features:

1. Nitrogen sealed circulation greatly saves gas usage, improves experimental safety, and prevents sample oxidation

2. A high-precision oxygen measurement system that automatically controls the start and stop of the feed based on the concentration of oxygen, improving the safety of the experiment

3. Sensitivity measurement system and automatic pressure relief to improve the safety of space pressure

4. Efficient filtration system greatly reduces material loss after drying

5. Multi stage pinhole solvent condensation system greatly improves the recovery rate of solvents

6. Multiple temperature detection systems to ensure the drying effect of some thermosensitive materials

7. Variable frequency fan allows for arbitrary control of the inlet and outlet air volume, greatly reducing the loss of small materials

8. The jacket type heating system reduces heat loss in the pipeline, has high temperature control accuracy, and also improves the safety of the machine at high temperatures

9. The vortex separators in the drying tower are detachable for cleaning, solving the problem of difficult temperature cleaning

10. 7-inch large LCD touch screen, temperature curve memory function, real-time monitoring, the whole machine is made of stainless steel material

11. Optional self-produced nitrogen generator to reduce the frequency of nitrogen cylinder usage

Product Parameters:

Inlet air temperature: room temperature -250 ℃ (accuracy ± 0.5 ℃ with curve memory function)

Export temperature: room temperature -100 ℃ (accuracy ± 0.5 ℃)

Condensation temperature: -15 ℃

Pipeline temperature detection: room temperature -100 ℃ (accuracy ± 0.5 ℃)

Feed rate: 50-2000ml/H

Atomization method: Two stream type

Oxygen measurement system detection range: 0-100% (accuracy 0.1)

Oxygen detection module: Ensure that the oxygen concentration is below 3% before starting feeding (the value can be set arbitrarily)

Pressure measurement system range: (0-100) Kpa

Explosion proof module: Automatic pressure relief above 0.02MPA (value can be set arbitrarily)

Explosion proof film: automatic type

Wind volume adjustment: 0-150m ³/h adjustable (variable frequency fan)

Drying tower size: φ 20 * H40cm

Filter recycling size: φ 17 * H58cm

Condensation device size: φ 17 * H88cm

Overall dimensions: 106 * 95 * 108cm (length, width, height)

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.