EN

Closed loop spray dryer

The closed cycle spray dryer is a new upgrade of the small closed cycle spray dryer in the laboratory. It is a spray dryer for organic solvents, toxic or harmful materials. When the concentration of organic solvents in the materials is too high, flammable and explosive, or the materials are suitable for oxidation, the machine uses nitrogen to replace the air in the drying atomization system. The nitrogen passes through the filtering device, and multistage cooling

  • Description

Product Introduction

FY-BPG2L is a newly upgraded small closed circuit spray dryer in the laboratory. It is a spray dryer for organic solvents, toxic or harmful materials. When the organic solvent concentration in the materials is too high, flammable and explosive, or the materials are suitable for oxidation, the machine uses nitrogen to replace the air in the drying and atomizing system. After passing through the filtering device and the multi-stage condensing device, nitrogen is used in a closed cycle, so as to ensure the safety during the experiment, and also ensure that the samples are not oxidized, and complete the drying and collection process.

Spray dryer has obtained relevant patent number:

ZL 2020 2 0764086 .6   ZL 2024 2 0540417.6

ZL 2022. 2 0958969.X    ZL 2022 2 1005919.6

ZL 2020.1003336.5    ZL 2022.2 1016352.2

Spray dryer obtains relevant soft coating: 2024SR0148.55

 

Product features:

1. The whole machine is made of stainless steel material, with a detachable mobile base bracket for easy access to the laboratory

2. Nitrogen is utilized in a closed loop, greatly reducing gas usage, ensuring high safety, and preventing sample oxidation

3. A high-precision oxygen measurement system that automatically controls the start and stop of the feed based on the concentration of oxygen, improving the safety of the experiment

4. Sensitivity measurement system and automatic pressure relief to improve the safety of space pressure

5. The fully automatic filtering and dust removal system greatly reduces the loss of materials after drying

6. Multi stage pinhole solvent condensation system, with a large condensation area, greatly improves the recovery rate of solvents

7. Multiple temperature detection systems to ensure the drying effect of some thermosensitive materials

8. Spray gun thermal protection device, reducing the phenomenon of material blockage in the spray gun

9. The spray gun is equipped with a collision pin anti blocking function, which can set the collision pin conduction time and frequency

10. Variable frequency fan allows for arbitrary control of the inlet and outlet air volume, greatly reducing the loss of small materials

11. The jacket type heating system reduces heat loss in the pipeline, has high temperature control accuracy, and also improves the safety of the machine at high temperatures

12. The vortex separators in the drying tower are detachable for cleaning, solving the problem of difficult cleaning

13. Siemens control panel and Siemens PLC control system, temperature curve memory function, real-time monitoring

14. Optional self-produced nitrogen generator to reduce the frequency of nitrogen cylinder usage.

15. Optional imported spray gun

Product Parameters:

Inlet air temperature: room temperature -300 ℃ (accuracy ± 0.5 ℃ with curve memory function)

Export temperature: Room temperature -200 ℃ (accuracy ± 0.5 ℃)

Chiller temperature: -40 degrees (accuracy ± 0.5 ℃)

Pipeline temperature detection: room temperature -100 ℃ (accuracy ± 0.5 ℃)

Feed rate: 50-3000ml/H

Atomization method: Two stream type

Oxygen measurement system detection range: 0-100%

Oxygen detection module: Ensure that the oxygen concentration is below 3% before starting feeding (the value can be set arbitrarily)

Pressure measurement system range: (0-100) Kpa

Explosion proof module: Automatic pressure relief above 0.02MPA (value can be set arbitrarily)

Explosion proof film: automatic type

Fan power: 2.2kw

Wind volume adjustment: 0-150m ³/h adjustable (variable frequency fan)

Drying tower size: φ 350 * 1020mm

Collection tank: 2L

Dust removal method: automatic type

Bag dust removal size: φ 430 * 1350

Number of cloth bags: 4

Pulse gas capacity: 8L

Condensation tower size: φ 270 * 1140

Number of condensing towers: 2

Condensed water capacity: 50L * 2

Total condensing area: 5m ²

Size of solvent collection tank: φ 270 * 280mm

Quantity of solvent collected: 2

Heating core size: φ 204 * 1580

Heating power: 7.5KW

Overall dimensions: 2200 * 1100 * 2400cm (length, width, height)

If you are interested in our products, you can choose to leave your information here, and we will be in touch with you shortly.