Hit enter to search or ESC to close
The 3L closed loop spray dryer solves the problem of insufficient processing capacity of small laboratory models and large footprint of large models. This machine is compatible with the two. It is a spray dryer for organic solvents, toxic or harmful materials. When the concentration of organic solvents in materials is too high, flammable and explosive, or materials are suitable for oxidation, the machine uses nitrogen instead
Description
Product Introduction
FY-BPG3L closed-circuit circulation spray dryer solves the problem of insufficient processing capacity of small laboratory funds and large footprint of large models. This machine is compatible with the two. It is a spray dryer for organic solvents, toxic or harmful materials. When the concentration of organic solvents in the materials is too high, flammable and explosive, or the materials are suitable for oxidation, the machine uses nitrogen instead of the air in the drying atomization system. After passing through the filtering device and the multi-stage condensing device, nitrogen is used in a closed loop to ensure the safety in the experiment process, and also to ensure that the samples are not oxidized to complete the drying and collection process.
Spray dryer has obtained relevant patent number:
ZL 2020 2 0764086 .6 ZL 2024 2 0540417.6
ZL 2022. 2 0958969.X ZL 2022 2 1005919.6
ZL 2020.1003336.5 ZL 2022.2 1016352.2
Spray dryer obtains relevant soft coating: 2024SR0148.55
Product features:
1. The whole machine is made of stainless steel material, with a detachable mobile base bracket for easy access to the laboratory
2. Nitrogen is utilized in a closed loop, greatly reducing gas usage, ensuring high safety, and preventing sample oxidation
3. A high-precision oxygen measurement system that automatically controls the start and stop of the feed based on the concentration of oxygen, improving the safety of the experiment
4. Sensitivity measurement system and automatic pressure relief to improve the safety of space pressure
5. The fully automatic filtering and dust removal system greatly reduces the loss of materials after drying
6. Multi stage pinhole solvent condensation system, with a large condensation area, greatly improves the recovery rate of solvents
7. Multiple temperature detection systems to ensure the drying effect of some thermosensitive materials
8. Spray gun thermal protection device, reducing the phenomenon of material blockage in the spray gun
9. The spray gun is equipped with a collision pin anti blocking function, which can set the collision pin conduction time and frequency
10. Variable frequency fan allows for arbitrary control of the inlet and outlet air volume, greatly reducing the loss of small materials
11. The jacket type heating system reduces heat loss in the pipeline, has high temperature control accuracy, and also improves the safety of the machine at high temperatures
12. The vortex separators in the drying tower are detachable for cleaning, solving the problem of difficult cleaning
13. Siemens control panel and Siemens PLC control system, temperature curve memory function, real-time monitoring
14. Optional self-produced nitrogen generator to reduce the frequency of nitrogen cylinder usage.
15. Optional imported spray gun
Product Parameters:
Inlet air temperature: room temperature -300 ℃ (accuracy ± 0.5 ℃ with curve memory function)
Export temperature: Room temperature -200 ℃ (accuracy ± 0.5 ℃)
Chiller temperature: -40 degrees (accuracy ± 0.5 ℃)
Pipeline temperature detection: room temperature -100 ℃ (accuracy ± 0.5 ℃)
Feed rate: 50-3000ml/H
Atomization method: Two stream type
Oxygen measurement system detection range: 0-100%
Oxygen detection module: Ensure that the oxygen concentration is below 3% before starting feeding (the value can be set arbitrarily)
Pressure measurement system range: (0-100) Kpa
Explosion proof module: Automatic pressure relief above 0.02MPA (value can be set arbitrarily)
Explosion proof film: automatic type
Fan power: 2.2kw
Wind volume adjustment: 0-150m ³/h adjustable (variable frequency fan)
Drying tower size: φ 530 * 1100mm
Collection tank: 3L
Bag dust removal size: φ 260 * 1000
Condensation tower size: φ 270 * 1140
Number of condensing towers: 2
Condensed water capacity: 50L * 2
Total condensing area: 7m ²
Size of solvent collection tank: φ 270 * 280mm
Quantity of solvent collected: 2
Heating core power: 7.5kw
Whole machine power: 10kw
Host reference size: 1600 * 1300 * 2100cm (length, width, height)