Hit enter to search or ESC to close
Two stage recovery small spray dryer (glass)
Description
Product Description:
The small spray dryer is mainly suitable for universities, research institutes and laboratories of food, medicine and chemical enterprises to produce micro particle powders. It has broad spectrum applicability to all solutions such as emulsion and suspension, and is suitable for drying heat sensitive substances such as biological products, biological pesticides, enzymes, etc. Because the sprayed materials are only exposed to high temperature when sprayed into aerosol particles, they are only heated instantaneously, which can keep the active ingredients of these active materials intact after drying.
Main features:
1. The 7-inch color large touch screen is used for operation. After the spray process parameters are set, the machine automatically works. The touch screen displays the running animation, the running process is clearly displayed, and the power off memory function is provided:
2. Automatic stop function of fan: After the instrument finishes working, the fan should be kept in working state for the glass part to cool down. This machine is set through an intelligent program, and when the inlet temperature is below 30 degrees, the fan will automatically shut down without manual shutdown.
3. The machine has a misoperation protection function. When the fan and heater switches are used in the wrong order, the machine automatically reminds to prevent novice operators from accidentally damaging the machine.
4. Equipped with an oil-free air compressor, the particle size of the powder sprayed follows a normal distribution, with good fluidity and low noise;
5. The atomization structure of two fluid spray, the whole machine is made of stainless steel materials, compact design, no auxiliary equipment, convenient use, as new as ever.
6. The whole machine is made of stainless steel, with two fluid spray atomization structure. The spray, drying and collection systems are made of transparent high borosilicate heat-resistant glass or stainless steel.
7. The feeding amount can be adjusted through the feeding peristaltic pump.
8. The dried finished powder has a relatively uniform particle size.
By adjusting the atomization state, it is possible to collect powders of different particle sizes through drying.
10. For viscous materials, the small spray dryer is equipped with a nozzle cleaner (through needle), which will automatically clear when the nozzle is blocked, and the frequency of through needle can be automatically adjusted;
Technical Specifications:
1. Product model: FY-PWGZ100S
2. Inlet air temperature control: 30 ℃~250 ℃
3. Processing capacity range: 0-1500mL/h (actual processing capacity depends on material characteristics)
4. Feed rate: The peristaltic pump can be adjusted up to 2000ml/h
5. Minimum feed quantity: 50mL
6. Real time PID temperature control technology, real-time online display of inlet and outlet air temperatures, with a temperature control accuracy of ± 1 ℃
7. Drying time: 0.8-1.0 seconds
8. Color LCD touch screen parameter display: inlet temperature/outlet temperature/peristaltic pump speed/air volume/needle frequency
9. Nozzle diameter: 0.5mm/0.8mm/1.0mm/1.2mm/1.8mm optional, and can be customized according to requirements
10. Overall power: 3.8KW/220V
11. Equipment dimensions: 1380mm (height) × 770mm (length) × 590mm (width)